inertia mass
英 [ɪˈnɜːʃə mæs]
美 [ɪˈnɜːrʃə mæs]
网络 惯性质量
双语例句
- Yawing moment of inertia of sprung mass
簧上质量横摆惯性矩 - It is very simple and convenient to calculate, with the generalized form of perpendicular axe theorem, moment of inertia of rigid objects that the mass distribution is symmetry.
在刚体的质量分布具有一定的对称性的情况下计算刚体转动惯量十分方便。 - The diagonal inertia tensor of mass relative to the center of mass.
相对于重心的质量的惯性张量对角线。 - Inertia stabilizers now give bonuses to mass and agility and have a penalty to signature radius.
内部稳定装置现在将对舰船质量减少而灵活度有所提高，对自身信号半径有惩罚性提高。 - With this method the imput torque can be partially or complete balanced, using the moment of inertia of the mass which is added to input crank for balancing the shaking force.
利用该方法可在机构的摆动力完全平衡的基础上，利用平衡摆动力时在输入轴上的附加质量的转动惯量来部分或完全平衡机构的输入扭矩。 - At the same time, the sliding vibration character of inertia ofa single mass structure and the sliding vibration response of a muti-mass structure are discussed.
同时，文中从研究单质点结构的滑动振动惯性力入手，进而对多质点结构体系滑动振动反应进行探讨，分别给出了结构滑动隔震的自身稳定条件。 - With a stable and fixed parameterized gait, ZMP stability margin is analyzed while changing the robot links'mass, moment of inertia and CM ( center of mass) position.
采用稳定的参数化步态，在步态不变的情况下，改变机器人各连杆的质量、转动惯量和质心位置，分析其对ZMP稳定裕度的影响。 - The rotational inertia is counted in the mass matrix used in the analysis.
厚板条的质量矩阵计入转动惯量。 - A Method Of Measuring The Inertia Mass
一种测量惯性质量的方法 - We first calculate the velocity potential between two adjacent time-steps and obtain the inertia force and added mass through integration.
本文通过直接求解船在变速运动时两个相邻时刻的速度势，进而积分得到附加惯性力及附加质量。 - According to energy conservation theory, expression of vehicle mass is presented and the relationship between moment of inertia corresponding to the simulated vehicle mass and vehicle parameters is established.
根据能量守恒理论，给出了汽车质量的表达形式，建立了所模拟汽车的质量相对应的转动惯量与汽车参数（车身重量G、车轮半径r、前后车轮制动力分配比β）之间的关系。 - It is also shown that the influence of the rotary inertia of the mass block on the shear failure is not negligible.
质量块的转动惯量对于剪切失效具有不可忽略的影响。 - Crank and connecting rod mechanism is the main part of the internal-combustion engine. The forces acting on the crank and connecting rod mechanism include inertia force produced by moving components mass and cylinder pressure on the piston which varies with crank-angle.
曲柄连杆机构是内燃机的核心构件，作用在曲柄连杆机构上的力主要是由其运动质量产生的惯性力和作用在活塞上的气体压力，这些力或力矩随着曲柄转角的不同而变化。 - But the moment of inertia of the added mass should be adjusted according to the requirement.
如需完全平衡机构的输入扭矩，只需调整原附加质量的转动惯量。 - Governing factors for the bubble motion are the force due to the pressure gradient, the drag force due to the flow resistance of the surrounding liquid and the inertia force due to virtue mass of liquid.
气泡运动方程中考虑了流场压力梯度差产生的力、气泡周围液体产生的阻力及由于液相质量产生的惯性力等影响气泡运动的因素。 - Effective moment of inertia of medium mass nuclei at the saddle point
中等质量核的裂变有效转动惯量 - Inertia Mass Simulation System Design for Motorcycle Brake Test-Bed
摩托车制动器试验台的惯性质量模拟系统设计 - Based on complex inertia mass, the coupled dynamic characteristics of three suspension structure systems models in different modal frequency overlapping scale between suspension primary structure and secondary structure were studied.
根据悬挂子结构的复惯性质量和主支撑结构的模态参数，对悬挂结构系统的耦合动态响应进行了频域研究，采用时程分析方法对结果进行验证； - Based on modes of the primary structure, the interaction between MTMD and primary structure is studied, and complex inertia mass is presented which explains clearly and briefly the action mechanism between MTMD and structure.
基于主结构多模态耦合进行推导分析，阐述了MTMD与结构之间的相互作用关系，提出MTMD的复惯性质量。 - Firstly, the analytical expressions of dynamic stiffness matrix of plane beam for transverse vibration with considering the shear distortion and rotary inertia of mass are presented by directly solving motion differential equations of a uniform Timoshenko beam.
首先通过直接求解等直Timoshenko梁单元的运动微分方程，导出考虑剪切变形和转动惯量影响的平面梁单元动态刚度阵的解析表达形式； - Photoelastic Simulation of Stress in Connecting Rod Loaded by the Inertia Force of Its Distributed Mass
连杆分布质量的光弹性模拟研究 - Design and Experiment on Diesel-generator with Inertia Mass
配蓄能惯量质量的柴油发电机组设计和试验研究 - To research the variation of the inertia force of moving mass along cantilever is of vital importance to soluble the problems of designing and flaw detecting the cantilever device.
研究移动质量沿悬臂梁运动惯性力变化规律，对于悬臂梁装置的设计和分析具有重要的意义。 - The optimization indicated that the moment of inertia and the mass of outside framework have a decrease obviously in restrict condition of satisfy the structural dimensions and natural frequencies. The impact of the optimization is obvious, and the optimization method is satisfied.
优化结果表明，在框架满足尺寸参数和一阶固有频率约束的条件下，外环框架转动惯量与质量同初始方案相比均有显著下降，优化效果明显，所采用的优化方法取得了令人满意的效果。 - The inertia effect of moving mass on the dynamic response of cantilever beam is investigated subjected to the analysis of time-varying systems.
对系统的时变特性进行分析，研究了移动质量惯性对悬臂梁动态响应的影响，同时也分析了质量块的质量和速度对系统时变特性的影响。 - Considering the inertia effect of single moving mass, the governing equations of bending-torsional coupling vibration are established. Meanwhile, the dynamic behavior of the beam by external torque is discussed.
考虑质量块的惯性效应，建立单个质量块作用下梁结构弯扭耦合振动的控制方程，详细研究了梁在外加扭力矩作用下的动力学行为。 - Mass property of measuring equipment for measuring the Mass, center of mass, moment of inertia, Product of inertia and other Mass property parameters of special equipment.
质量特性测量设备是测量质量、质心、转动惯量、惯性积等质量特性参数的专用设备。 - To sum up, the vibration system of geophysical prospecting car is characterized by its low starting frequency, big inertia mass and random signal.
物探车振动系统的特点归纳起来主要有起扫频率低、簧载质量大并且参有随机信号成分。 - The effects of foot radius, moment of inertia and center of mass on the basins of attraction are summarized, and a model can endure large initial disturbance has been obtained.
研究了吸引盆随着足半径、转动惯量和质心位置变化的规律，得到了能够承受较大初始扰动的参数组合。 - The effects of foot radius, moment of inertia and center of mass on the arising of period-doubling and chaotic gaits are summarized.
对被动行走中的倍周期和混沌现象作了分析，研究了足半径，转动惯量及质心位置影响被动行走器倍周期及混沌步态出现的规律。